Rice Mill Drum Sieve Machine

    The Rice Mill Drum Sieve Machine can be used in the raw material receiving part of flour mills, feed mills, grain silos and other industries. It is mainly used to remove large impurities, such as straw, straw, hemp rope, paper, clods, etc., to prevent damage to the equipment of the subsequent process. Its characteristics are high output, low power consumption, simple structure, and land occupation It is small, easy to maintain, easy to install, and convenient to change the screen tube, so that the material can achieve the best separation effect.

Operation of Rice Mill Drum Sieve Machine:

1.After the Rice Mill Drum Sieve Machine is installed, it should be run in no material condition. If there is any abnormal situation, you should stop immediately and check the cause of the failure. After everything is normal, you can put it into production.

2.Adjust the flow of materials. If the flow rate is too large, the material will accumulate too much at the bottom of the screen cylinder, and if the screen body is too heavy, which may lead to further accumulation and overload the screen cylinder.

3.The rotation speed of the sieve body should not exceed 18r/min, otherwise the material will not be able to move relative to the sieve surface.

4.The grain outlet on the sieve body, the big impurity outlet should be equipped with a hopper

5.During the operation of the primary cleaning screen, if the screen hole is blocked by large impurities, it must be cleaned with an iron hook when the machine is stopped. Never clean it by hand during operation to avoid danger.

Specification:

Features and advantages 

1. Avoid damage effectively for the following processing machines by big impurities  

2. Good after-sales service and installation instructions

3. Good self-discharging impurities ability

4. Simple structure, large sieve hole, large processing capacity

http://www.gimetech.com/